Hi, its me Abelene.

It is finally warming up, and all the insects are on the wing, and while the meadow grass grows higher by the hour, the days are rolling on like an enchanted pastoral scene in the mountains. Jen is weaving pensively through the afternoons, and the crew of inanimate objects and I are having our usual philosophical debates in the closet. All is in an easy and unfettered mood, the mood of warmth and days growing longer at long last, a glorious and unassailable Spring!

As for the alpaca scarf, it appears to be a Freudian Slip of weaving, as these colors turned out completely Autumnal, being Jen’s absolute favorite season, none the less, it is exquisite, even to be woven in Springtime.

Abelene & The Crew

Note from Jen: A few months back I made a discovery that I really want to revisit, for it has developed and I want to make sure to bring it to the fore, so that others may benefit from it. The improvised wooden piece that I came up with in the post Ikat No.1 ; I have developed its use in every weaving since, essentially becoming a loom “breast beam” as well as a fine tensioning tool. I wrote —

“When I was more than halfway through the weaving, and the front cloth beam was getting pretty packed with woven fabric and cardboard I found the cloth beam to have a certain amount of “squish”, the selvedges conforming to the curve of the cloth winding on irregularly, and not really producing a perfectly flat weave. This I assume is one of the things about rigid heddle weaving, the cloth beam builds cloth and as it does the woven cloth distorts in shape, as well as effects the stability of the tension.“

I have found several reasons why this simple fine sanded wood slat board has made a difference:

• It is a fine-tuning for tension I found in rigid heddle weaving very much needed, as the tension changes in the down and up shed of the reed. The board moved forward (toward the weaving) loosens the tension – and moved back (toward the weaver) tightens it. This fine tuning of the tension allows better weaving , but also so that I can position a temple, or add cardboard warp separators, and a pulling back of the board tightens the tension, which helps open the sheds significantly.
• It offers the crisp edge of a proper breast beam, such that some rigid heddle looms do not have as part of their simplistic design, Ashford being one of them. This is especially necessary if using a temple to stretch the weave the full width of the rigid reed, also I have found is necessary for a well balance weave with neat and tidy selvedges. Without a temple I find the selvedge warp threads get frayed-to-breaking, as the cloth can narrow and the selvedge threads rub against the reed, and it is a disaster when a warp thread breaks, especially the selvedge warp threads.
• My tensioning board is 1/4″ thick and 2″ wide, it should be as long as the weaving width of the loom, so that it easily can support a maximum width warp. I will be making one of these for all of the rigid heddle looms I have.

♣   Weaving Notes  ♣

• Yarn: Knit Picks Alpaca Cloud lace weight, in Dashwood (med brown), Zadie (deep gold), Molesley (beige), and Lydia (brick red). 440 y = 50g
• Loom: Ashford 16″ rigid heddle loom
• Warping method:  Easy direct warp method for rigid heddle, 1 end in hole and 1 end in slot.
• Number of warp ends: 240
• Reed: 15 dent rigid heddle reed.
• Width in reed: 15″
• Selvedges: I did not add extra ends to the selvedges, but did use a temple.
• Sett after finishing: Warp 16 epi, and weft 16 ppi.
• Color Pattern Warp: [30 ends Dashwood, 30 ends Zadie, 30 ends Molesley, 30 ends Lydia] x 2
• Pattern Weft: Gold & Red dominant pattern: 2″ squares of [Zadie, Lydia, Dashwood, Zadie, Lydia, Molesley] rep length of warp.
• Finished: 3″ hand-twisted fringe, then washed and air-dried hanging, and lightly steam pressed. Measures 72″ long and 14.5″ wide, and weighs 120g. 
• Yardage:  Total yardage used for finished piece = 1056y, figured from weight of finished piece and not including loom waste.